Tanks for hydrographic printing

Tanks for hydrographic printing. They are designed for the application of graphics from PVE foils to objects made from various materials. Working dimensions from 100 x 100 cm. Application tanks for hydrographic printing are delivered with all the necessary documentation, CE marking which is valid throughout the EU. It is machine equipment.


The tanks are designed for application of hydrographic printing with all the necessary equipment. After switching the device on, the heater in the filtration area automatically starts working and warms up the water to the set temperature. After warming it, the temperature of the water is maintained at the set value. To make application easier, there are separating bars around the tank which square-off the hydrographic foil. By switching on the filtration after application, the water gets cleaned and the device is ready for its next use.
Water circulates in a closed circuit. There is a multi-level pump for setting the correct filtration pressure which is fitted to the tanks. To reduce the costs for heating larger tanks, it is possible to connect the tank to the heating system of the building. In summer, the heating can work thanks to a solar collector for water heating.

Additional Equipment

We offer additional equipment for the tanks which is not necessary for professional application of hydrographics. In particular thermal insulation of the tank and addition of a second stainless cover, lid with possible exhaust of the odour from the activator. Commercial wheels for easy transfer of the tank, controlling the filtration using legs, etc…
A novelty for 2017 is controlling the tank using a mobile phone.